Pro-RF Al 21M
Adjustable Aluminum Attenuation Filter - Diagnomatic by Pro-Project - 02-308

Pro-RF Al 21M from Diagnomatic by Pro-Project combines a 21 mm aluminum filter with a 4 mm add-on plate to provide two attenuation thicknesses.

Use the main filter alone for 21 mm of aluminum or add the supplied 4 mm plate for a total of 25 mm.

A set made of a square aluminium block, a square aluminium thin filter, and two thumbscrews.
A set made of a square aluminium block, a square aluminium thin filter, and two thumbscrews.
A square aluminium block and a square aluminium thin filter are screwed together with two thumbscrews.
A square aluminium block and a square aluminium thin filter are screwed together with two thumbscrews.
A set made of a square aluminium block, a square aluminium thin filter, square copper thin filter, and two thumbscrews.
A set made of a square aluminium block, a square aluminium thin filter, square copper thin filter, and two thumbscrews.

Click a photo or illustration to enlarge it.

Models and Ordering

Part numberModel / configuration
02-308Pro-RF Al 21M

Specifications

  • filter dimensions: 120 x 120 x 21 mm
  • additional 4 mm thick aluminium filter
  • mounting frame
  • made of the purest aluminium
  • two mounting screws included
  • optional 1 mm thick copper filter (that can be attached to the aluminium) for tests at and above 100 kV (Pro-RF Cu 1) (02-304)
  • other sizes of filters upon request

Features and Test References

  • complies with:
    – IEC 61223-3-1
  • CE marked
  • Includes a manual covering the tests, result evaluation and recording.
Request product information or a quote
Contact Supertech at (800) 654-1054 or send a quote request.
Copyright © 2026 Supertech, Inc. All rights reserved.