Pro-Tec III Syringe Shields
1 cc, 2.5 cc, 3 cc, 5 cc, 10 cc
and 20 cc syringes.
engages or releases syringe.
- Tungsten shielding
- Lead glass window
- Lightweight
- Fits most disposable syringes
- Safe-T-Lock design reduces exposure with faster handling
- Easily sanitized with alcohol wipes
The Pro-Tec® III Syringe Shield reduces hand exposure and is convenient to use.
The barrel of the shield is constructed of .08" (2 mm) thick tungsten that will reduce radiation exposure from Tc-99m by more than 99% attenuation for Tc-99 tested with TLD chips. A 5.05 density (1.5 mm lead equivalency) lead glass window provides protection and visibility. A white reflective surface on the shield interior improves viewing of the syringe's markings and fluid content. A bevel around the lead glass helps protect it from scratching or breaking.
The Safe-T-Lock design provides increased protection by allowing minimal handling. The Safe-T-Lock design grips and secures the syringe upon insertion and will release the syringe at the press of a button. Disposing used syringes is easy; invert the syringe shield over a sharps container, press the release button and the syringe freely disengages.
OperationInsert the syringe through the tubular shield and align the syringe volume calibrations to the lead glass window. Once the syringe is fully inserted into the shield, the shield lever lock automatically engages to hold it securely in place.
To remove the syringe from the tubular shield, invert the syringe shield over a shielded Sharps container and simply press and hold down the lever. With the lever depressed, the syringe will drop right out of the shield without additional handling.
MaintenanceAs required, clean the syringe shield with alcohol. Do not clean lead glass with decontaminating solution as this may fog the glass. Do not soak in water.
Pro-Tec® III Syringe Shields accommodate the standard sized 1 cc, 3 cc, 5 cc, 10 cc and 20 cc syringes.
| Pro-Tec® III Syringe Shields: | |
| 007-723 | Syringe Shield, 1 cc (BD luer lock) |
| 007-734 | Syringe Shield, 1 cc (press fit) |
| 007-755 | Syringe Shield, 2.5 cc |
| 007-735 | Syringe Shield, 3 cc |
| 007-736 | Syringe Shield, 5 cc |
| 007-738 | Syringe Shield, 10 cc |
| Pro-Tec® III Syringe Shields (for international syringes): | |
| 007-755 | Syringe Shield, 2.5 cc For Terumo Syringe |
| 007-745 | Syringe Shield, 3 cc For BD Plastipak and Terumo 3 ml Syringes |
| 007-746 | Syringe Shield, 5 cc For Once Syringes |
| 007-748 | Syringe Shield, 10 cc, Euro |