Pro-CT Dose AAPM TG-111
Extended CT Dose Phantom - Diagnomatic by Pro-Project - 04-210

Pro-CT Dose AAPM TG-111 from Diagnomatic by Pro-Project uses three PMMA sections to provide a 600 mm long phantom for CT dose measurements following AAPM TG-111.

Three 20 cm sections form the extended measurement volume. The longer body captures scatter beyond the length of a conventional CTDI phantom.

A cylindrical PMMA object with engraved lines on four sides becomes a cross on the front and back. The whole thing is made of three even pieces connected with four rods through holes.
A cylindrical PMMA object with engraved lines on four sides becomes a cross on the front and back. The whole thing is made of three even pieces connected with four rods through holes.

Click a photo or illustration to enlarge it.

Models and Ordering

Part numberModel / configuration
04-210Pro-CT Dose AAPM TG-111

Specifications

  • total dimensions: diameter 300 mm, length 600 mm
  • made of PMMA
  • built of 3 separate 200 mm thick homogenous PMMA cylinders, with five Ø13.1 mm CT probe holes (one in the middle and 4 around the perimeter, 90° apart and 10 mm from the edge)
  • 4x 620 mm long PMMA filler plugs with thread to fill unused holes and hold all cylinders together
  • 2x additional PMMA rods to help center the probe tip in the middle of the phantom
  • engraved markings on phantoms for easier positioning
  • carrying case with a trolley

Features and Test References

  • complies with:
    - AAPM TG-111
  • CE marked
  • Includes a manual covering the tests, result evaluation and recording.

Related Products

Request product information or a quote
Contact Supertech at (800) 654-1054 or send a quote request.
Copyright © 2026 Supertech, Inc. All rights reserved.