Supertech ®
Thousands of Products
Serving You is Our Pleasure
Registered w/
Dun & BradstreetWOSB - Woman Owned Small Business
Established 1973
Product Categories
Anthropomorphic CT Head Phantom RS-250
Model Number RS-250
Computed Tomography Head Phantom
Anthropomorphic
Molded Around Skull
Checks Important Physical Parameters
Provides Realistic System Check
Ideal For Training
Polycarbonate Base Dimensioned For Scans Parallel or Perpendicular to Longitudinal Axis
Section A: Aluminum plates, 0.4 mm thick, set a 45° angle, measure beam width and slice thickness.
Section B: The dosimetry section provides patient -exposure controls, and checks on abnormal internal doses before actual patient scans. Customization to accommodate TLD with rods or chips is available.
Section C: Cylindrical tumors of graded sizes and radiodensities establish high and low-contrast resolution and demonstrate partial beam-averaging effects.
Section D: The anthropomorphic section provides actual auditory ossicles in an air-contrast inner ear and a fractured petrous bone. Small tumors in the posterior fossa are placed in an area which most scanners image with difficulty.
Section E: 1/4 in. diameter aluminum rod on the phantom’s longitudinal axis, checks general alignment and "Dry Water" gives a realistic "noise check."
Supertech ®
Address:
P.O. Box 186
Elkhart, IN 46515 USA
Sales: 800-654-1054
Phone: 574-264-4310
Fax: 574-264-9551
Email: sales@supertechx-ray.com
Support: support@supertechx-ray.com
