Supertech ®
Thousands of Products
Serving You is Our Pleasure
Product Categories
Acrylic Phantoms for Diagnostic X-Ray 76-2
Phantoms conform to AAPM recommendations contained in Report #31, "Standardized Methods for Measuring Diagnostic X-Ray Exposure."
Patient-equivalent acrylic and aluminum phantoms provide the necessary attenuation between the source and AEC or ABC detectors
Helps you comply with JCAHO requirements for radiographic exposure measurements
These phantoms are recommended in AAPM Report # 60, "Instrumentation Requirements of Diagnostic Radiological Physicists"
JCAHO requires that x-ray exposure measurements be determined for commonly used projections in all radiographic suites. In order to provide this information when using Automatic Exposure Control (AEC) or Automatic Brightness Control (ABC) systems, specifically designed phantoms must be used. Attenuating material must be used between the source and AEC or ABC detectors. Since these detectors are energy dependent, measurement of skin entrance exposure requires the use of patient-equivalent phantoms for meaningful results.
AAPM Report #31 recommends the use of four special phantoms for use in diagnostic x-rays. These acrylic and aluminum phantoms are patient-equivalent, and are specifically designed to conform to the AAPM recommendation.
Supertech ®
Address:
P.O. Box 186
Elkhart, IN 46515 USA
Sales: 800-654-1054
Phone: 574-264-4310
Fax: 574-264-9551
Email: sales@supertechx-ray.com
Support: support@supertechx-ray.com