Supertech ®
Thousands of Products
Serving You is Our Pleasure
Registered w/
Dun & BradstreetWOSB - Woman Owned Small Business
Established 1973
Product Categories
Alderson Phantoms
"KIP" Kohrman Injection Phantom RS-1300
Always Available for Teaching/Training
Always Available to Maintain Skills
Checks Out Fluoroscopy System
No Biohazards Which Are Associated With Cadavers
KIP has been designed to provide realistic functions, while avoiding complications not essential to its use. Proper fluoroscopic needle placement techniques can be taught or practiced without fear of biological contamination hazards associated with fresh or frozen cadavers.
Fluoroscopically, the look and feel
of the anatomical landmarks is
important and can be demonstrated
with the use of KIP. Needle placement
for caudals, epidurals, selective nerve
and root blocks, medial branch blocks,
facet injections and sympathetic
blocks can all be demonstrated.
Practice RF needle-placement along
with disc needle-placement plus
injection techniques for shoulder,
hip and symphysis pubis, all in the
convenience and safety of your own
particular laboratory or teaching facility.
There is now no need to deal with local,
state, and federal regulations regarding
biohazards associated with cadavers.You can keep KIP in the closet and
take it out whenever needed.
KIP has been developed to help one learn and to hone skills for proper needle placement for a variety of interventional techniques. It was not practicable to design the phantom with a capability of demonstrating realistic flow patterns associated with diagnostic dyes, so it is not designed for actual injections. However, the all important fluoroscopic guidance and needle-placement are realistic in KIP.Further simplifications are the elimination of skeletal articulations that permit joint or spinal motions and the elimination of rib numbers 2 to 9; the rigid flesh makes these superfluous. Positioning of KIP as a single unit provides complete and realistic positioning capabilities.
KIP has the capability for injections not only in the spine, but also at one shoulder, one hip, and at the pubis symphysis.
KIP has skeletal structures covered with a soft gel and a latex skin, supported by a hard, synthetic material.
KIP has been tested to determine the probable effective life of injection sites; a gel/skin section was used for a trial and six hundred injections were made in a dime-sized area. There was no perceptible degradation of the latex skin or of the gel itself. Considering the far greater area available in KIP, it is unlikely that repairs or refurbishments will be needed for a very long time.
The gel-filled injectable parts of KIP are completely encased in a latex skin. Many lattices are known allergens, but the latex skin of KIP is made of the same material that is used in the RSD PIXY phantom. Hundreds of these phantoms are in use, but no user has ever complained of allergic reactions. The RSD technicians, who have worked for years with this latex, have also never had such reactions. Allergic reactions are not expected to be a concern for the vast majority of users. The materials and design processes in KIP are made not only to simplify the overall process, but also to keep it as realistic as possible.
KIP (Injection Phantom) Catalog No. – RS-1300
Supertech ®
Address:
P.O. Box 186
Elkhart, IN 46515 USA
Sales: 800-654-1054
Phone: 574-264-4310
Fax: 574-264-9551
Email: sales@supertechx-ray.com
Support: support@supertechx-ray.com
